Product ID:EC-1648A STRUCTURAL EPOXY ADHESIVE, PT A
MSDS Date:04/29/1986
FSC:8040
NIIN:00-987-7157
Kit Part:Y
MSDS Number: BGBYJ

3M COMPANY-ACS DIVISION

3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Cage: 04963

EATON CORP PRESSURE SENSORS DIV

BETHEL, CT 06801-1901 US

Telephone: 203-796-6000

Cage: 02750

ALUMINUM SILICATE (AS NUISANCE DUST OR PARTICULATES NOT

CAS: 1302-76-7

RTECS: BD1450000

Fraction By Weight: <18%

OSHA PEL 15 MG/M3 TOTAL DUST

ACGIH TLV: 10 MG/M3 TDUST;8990

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <18%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

POLYAMIDE RESIN

Fraction By Weight: 81%

CHROMIUM (III) OXIDE

CAS: 1308-38-9

RTECS: GB6475000

Fraction By Weight: 1.0%

OSHA PEL 0.5 MG/M3 (CR)

ACGIH TLV: 0.5 MG/M3 (CR); 8990

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITANT, SENSITIZER.
Effects of Overexposure:EYE: SEVERE IRRITANT. SKIN: POSSIBLE
IRRITATION AND SENSITIZATION ON REPEATED/PROLONGED EXPOSURE.
INHALATION: FUMES OR DUST FROMCURING OPERATION MAY CAUSE
IRRITATION OF RESPIRATORY SYSTEM. INGES TION: G. I. SYSTEM
IRRITATION POSSIBLEBUT UNLIKELY.
Medical Cond Aggravated by Exposure:ANY PRE-EXISTING ALLERGY OR
SENSITIVITY.

First Aid:EYE:IMMED FLUSH W/ LARGE AMT OF WATER FOR AT LEAST 10
MIN.CALL MD.SKIN:WASH W/ SOAP & WATER.INHAL:PROVIDE FRESH AIR.IF
BREATH DIFFICULTY PERSIST,CALL MD INGEST:NO FIRST AID
INDICATED.CONTACT MD.

Flash Point:N/R(PER MFR)
Extinguishing Media:WATER,CO*2,FOAM,DRY CHEMICALS
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:N/K(PER MFR)

Spill Release Procedures:NO CRITICAL STEPS.SCRAPE UP SPILL AND PLACE IN
METAL CONTAINER FOR DISPOSAL OR SALVAGE.
Neutralizing Agent:NONE

Handling and Storage Precautions:AVOID EYE,SKIN CONTACT.ANY CURING
STATIONS USING HEAT SHOULD BE VENTED TO THE OUTDOORS.KEEP CONTAINER
TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:IF CURED MIXED PRODUCT IS SANDED OR GROUND,USE
PROTECTIVE GOGGLES AND DUST MASK TO PREVENT IRRITATION.KEEP OUT OF
REACH OF CHILDREN.

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK WHEN SAND OR
GROUND CURED PRODUCT.
Ventilation:MECHANICAL,LOCAL TO OUTDOORS
Protective Gloves:IMPRVIOUS
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
UPDATE PER 3M MSDS DOC# 10-6260-3 DATED 29 APRIL 1986. 3M ID# IS
62-1649-8526-9 PART A OF TWO-PART A/B KIT. KEY1:N1.

HCC:V7
Spec Gravity:1.04
Viscosity:PASTE
Evaporation Rate & Reference:N/R(PER MFR)
Solubility in Water:NIL
Appearance and Odor:VISCOUS GREEN PASTE,AMIDE ODOR
Percent Volatiles by Volume:0.0

Stability Indicator/Materials to Avoid:YES
N/K PER MFR
Hazardous Decomposition Products:CO,CO*2,METALLIC PARTICULATE WHEN
EXPOSED TO FLAME.

Waste Disposal Methods:COMMERCIAL INCINERATION WITH DESTRUCTION AND
REMOVE EFFICIENCY GREATER THAN 99.99% OR RECLAMATION IS
PREFERRED.OTHERWISE,DISPOSE IN ACCORDANCE WITH LOCAL AND CURRENT
U.S. ENVIRONMENTAL PROTECTION AGEN CY,STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.